[Peptide blend · CJC-1295 + Ipamorelin]

CJC-1295 (no DAC) + Ipamorelin blend: units and amount of each

Per-peptide units charts · Fixed-ratio math · Research status with sources · Reviewed

Short answer: With 2 mL of bacteriostatic water in a CJC-1295 + Ipamorelin, 5 mg + 5 mg vial (5 mg CJC-1295 (no DAC) + 5 mg Ipamorelin), every 10 units on a U-100 insulin syringe holds 250 mcg CJC-1295 (no DAC) and 250 mcg Ipamorelin. The ratio is fixed, so you cannot change one peptide without changing the others. Amounts are arithmetic on the label, not dose advice.

What is in CJC-1295 + Ipamorelin blend?

This blend puts CJC-1295 without DAC (also called Mod GRF 1-29) and ipamorelin in one vial. Blends are almost always the no-DAC version; CJC-1295 with DAC is a different, long-acting molecule. Check your label.

Most listings are 5 mg + 5 mg (10 mg total). A 2 mg + 2 mg vial also appears. Both are 1:1, so each draw holds equal amounts of the two.

CJC-1295 + Ipamorelin, 5 mg + 5 mg

CJC-1295 + Ipamorelin, 5 mg + 5 mg: commonly labeled as 5 mg CJC-1295 (no DAC) + 5 mg Ipamorelin (10 mg total).
PeptideCommonly labeledShare of vialGuide
CJC-1295 (no DAC)5 mg50%CJC-1295 (no DAC) guide
Ipamorelin5 mg50%Ipamorelin guide

CJC-1295 + Ipamorelin, 2 mg + 2 mg

CJC-1295 + Ipamorelin, 2 mg + 2 mg: commonly labeled as 2 mg CJC-1295 (no DAC) + 2 mg Ipamorelin (4 mg total).
PeptideCommonly labeledShare of vialGuide
CJC-1295 (no DAC)2 mg50%CJC-1295 (no DAC) guide
Ipamorelin2 mg50%Ipamorelin guide

How many units: amount of each peptide per 10 units

The water volume changes how big each draw is, not what is in the vial. The highlighted row is 2 mL.

CJC-1295 + Ipamorelin, 5 mg + 5 mg

CJC-1295 + Ipamorelin, 5 mg + 5 mg, U-100 insulin syringe (1 mL = 100 units). Amount of each peptide in every 10 units.
Water addedUnits in vialCJC-1295 (no DAC) / 10 unitsIpamorelin / 10 units
2 mL200250 mcg250 mcg
3 mL300166.7 mcg166.7 mcg
5 mL500100 mcg100 mcg

CJC-1295 + Ipamorelin, 2 mg + 2 mg

CJC-1295 + Ipamorelin, 2 mg + 2 mg, U-100 insulin syringe (1 mL = 100 units). Amount of each peptide in every 10 units.
Water addedUnits in vialCJC-1295 (no DAC) / 10 unitsIpamorelin / 10 units
2 mL200100 mcg100 mcg
3 mL30066.7 mcg66.7 mcg
5 mL50040 mcg40 mcg

What a draw holds at 2 mL

CJC-1295 + Ipamorelin, 5 mg + 5 mg mixed with 2 mL. Draw sizes are examples for the conversion, not doses.
Units drawnVolumeCJC-1295 (no DAC)Ipamorelin
5 units0.05 mL125 mcg125 mcg
10 units0.1 mL250 mcg250 mcg
20 units0.2 mL500 mcg500 mcg
30 units0.3 mL750 mcg750 mcg

For any other vial, water volume or draw, the free peptide blend calculator does the same math for 2 to 5 peptides.

The math

  1. Concentration of each peptide. mg of that peptide ÷ mL of water. For CJC-1295 + Ipamorelin, 5 mg + 5 mg with 2 mL: CJC-1295 (no DAC) 5 ÷ 2 = 2.5 mg/mL, Ipamorelin 5 ÷ 2 = 2.5 mg/mL.
  2. Volume for the peptide you are targeting. amount ÷ its concentration = mL. Example: 250 mcg of Ipamorelin is 0.25 ÷ 2.5 = 0.1 mL.
  3. Syringe units. mL × 100 on a U-100 syringe: 0.1 × 100 = 10 units.
  4. Everything else in that draw. mL × concentration for each other peptide: 250 mcg CJC-1295 (no DAC).
The amount in the example is there to show the math, not a recommendation. How much to take is a decision for you and your prescriber.

The key limitation: the ratio is fixed

A blend is one solution, so every draw takes the same share of each peptide. In the example above, drawing 10 units for 250 mcg of Ipamorelin also gives 250 mcg CJC-1295 (no DAC). Doubling the draw to 20 units doubles all of them, to 500 mcg CJC-1295 (no DAC). There is no draw that changes one peptide and leaves the others where they are.

More or less water does not help either: it changes how many units each draw is, not the ratio between the peptides. If you need to set the amount of each peptide on its own, they have to be in separate vials (a stack), each with its own single-peptide calculation.

Research status of each peptide

We found no published human study of CJC-1295 + Ipamorelin blend as a blend. Below is what is published for each peptide on its own. "Amounts studied" are what a study gave or reported, often by a different route; they are not personalized advice. Confirm anything about your own use with your prescriber.

CJC-1295 (no DAC)

Not FDA approved. We found no published human trials of CJC-1295 without DAC (Mod GRF 1-29). The published human study usually quoted for "CJC-1295" used the DAC version, a different, long-acting molecule with an estimated half-life of 5.8 to 8.1 days. [1]

Amounts studied: None published for the no-DAC version. The DAC version was given under the skin in healthy adults; those amounts do not carry over to the no-DAC peptide in this blend.

Ipamorelin

Not FDA approved. It has been studied in people: a pharmacokinetic study in healthy men measured a half-life of about 2 hours, and a phase 2 trial after bowel surgery found no significant difference from placebo on its main outcome. [2][3][4]

Amounts studied: Both human studies gave it into a vein: infusions of 4.21 to 140.45 nmol/kg over 15 minutes (healthy men), and 0.03 mg/kg twice daily for up to 7 days (after bowel surgery). No published trial gave it under the skin or in a blend.

Regulatory status. As of October 2026 none of the peptides in these blends is FDA approved. In July 2026 an FDA advisory committee voted 8 to 6 to recommend adding BPC-157, KPV and TB-500 to the list of substances pharmacies may compound. FDA staff had recommended against it, the vote is not binding, and none has been added yet. [5]

Frequently asked questions

How many units of CJC-1295 + Ipamorelin blend do I draw?+
It depends on how much water is in the vial and the amount of one peptide you are aiming for. With 2 mL in a CJC-1295 + Ipamorelin, 5 mg + 5 mg vial, every 10 units on a U-100 insulin syringe holds 250 mcg CJC-1295 (no DAC) and 250 mcg Ipamorelin. To find the units for a set amount of one peptide, divide that amount by its concentration (mg in vial ÷ mL of water) and multiply by 100. How much to take is a decision for you and your prescriber.
How much bacteriostatic water do I add to a CJC-1295 + Ipamorelin, 5 mg + 5 mg vial?+
There is no single right amount. More water makes each draw bigger and easier to measure; less water makes it smaller. With 2 mL, 10 units holds 250 mcg CJC-1295 (no DAC) and 250 mcg Ipamorelin. With 3 mL, 10 units holds 166.7 mcg CJC-1295 (no DAC) and 166.7 mcg Ipamorelin. With 5 mL, 10 units holds 100 mcg CJC-1295 (no DAC) and 100 mcg Ipamorelin.
What is the difference between CJC-1295 + Ipamorelin, 5 mg + 5 mg and CJC-1295 + Ipamorelin, 2 mg + 2 mg?+
CJC-1295 + Ipamorelin, 5 mg + 5 mg is commonly labeled as 5 mg CJC-1295 (no DAC) + 5 mg Ipamorelin. CJC-1295 + Ipamorelin, 2 mg + 2 mg is commonly labeled as 2 mg CJC-1295 (no DAC) + 2 mg Ipamorelin. The ratio is different, so the same draw holds different amounts: with 2 mL, 10 units of CJC-1295 + Ipamorelin, 5 mg + 5 mg holds 250 mcg CJC-1295 (no DAC) and 250 mcg Ipamorelin, and 10 units of CJC-1295 + Ipamorelin, 2 mg + 2 mg holds 100 mcg CJC-1295 (no DAC) and 100 mcg Ipamorelin. Use the amounts on your own label.
Can I change the amount of one peptide in CJC-1295 + Ipamorelin blend without changing the others?+
No. The peptides are mixed in one vial, so the ratio is fixed when the vial is made. Every draw takes the same volume of all of them: drawing more of CJC-1295 (no DAC) also means drawing more of Ipamorelin. Adding more or less water changes the draw size, not the ratio. To adjust one peptide on its own you would need it in a separate vial.
How many draws are in a CJC-1295 + Ipamorelin blend vial?+
A vial mixed with 2 mL holds 200 units, so it gives 20 draws of 10 units or 10 draws of 20 units. All of the peptides run out on the same draw, because each draw takes the same share of each. In practice a little is lost to syringe dead space and the last drops in the vial.
Is CJC-1295 + Ipamorelin blend FDA approved?+
As of October 2026 none of the peptides in these blends is FDA approved. In July 2026 an FDA advisory committee voted 8 to 6 to recommend adding BPC-157, KPV and TB-500 to the list of substances pharmacies may compound. FDA staff had recommended against it, the vote is not binding, and none has been added yet.
Can I track CJC-1295 + Ipamorelin blend in Dose Track?+
Yes. Dose Track supports single-vial blends. Save the vial with the mg of each peptide and the water you added; the ratio stays locked, and each draw you log records the amount of every peptide in it. Your log stays on your phone.